EYE HORTILUX CMH 315 Grow Light VS Sun System CMH LEC 315 Grow Light

What Is A Ceramic Metal Halide Grow Light?

First, let’s clear up a point of confusion. I’m sure you’ve seen (even just in this article), several different terms and abbreviations. Ceramic Metal Halide (CMH) grow lights, Light Emitting Ceramic (LEC) and Ceramic Discharge Metal Halide (CDM) all refer to the same thing. CMH is the most common term.

Another point of confusion concerns their relationship to metal halide lights. CMH bulbs are a variation of MH bulbs, but they are quite different. Instead of using a quartz tube, they use a ceramic tube (more here), similar to an HPS bulb.

This allows a higher arc tube temperature, which in turn allows a better mix of gases to produce a more optimal spectrum (more on this below in the sections comparing CMH to MH and HPS). The light produced by a CMH bulb is much closer to natural sunlight than either MH or HPS (with a CRI of 96). It is, for practical purposes, a perfect combination of MH and HPS in a single bulb.

Advantages of CMH

Spectrum

The CMH spectrum combines the red-heavy HPS spectrum with the blue-heavy MH spectrum in one bulb, making it the perfect light for all stages of growth. With a high CRI, it is extremely close to natural sunlight, which is great for your plants and for your eyes (plants look more natural, making it easier to spot any discolorations or other issues).

Efficiency

CMH bulbs give you a much higher PAR output (the amount of light that is usable by plants) per watt than any other type of lighting, apart from the most expensive LED grow lights.

UV Light

The CMH spectrum also contains UV light of all type. Since UV-C light is harmful, the bulbs use a glass filter to block that range, leaving only UV-A and UV-B light, which many feel is beneficial to yield quality. There is no need for supplemental UV bulbs when using CMH lighting.

Lower Heat

CMH bulbs run much cooler than their MH and HPS counterparts, reducing, or even eliminating, the need for additional cooling equipment. They run hotter than LED lights, though.

Long Lifespan

CMH bulbs last much longer than other HID or fluorescent bulbs. The standard rule of thumb for MH or HPS bulbs is to replace them after 10,000 hours of use. Good CMH bulbs last over 20,000 hours. Moreover, they still retain 80% or more of their initial output after 20,000 hours. HPS and MH bulbs deteriorate much more quickly.

Today we are up with our 2 Best Ceramic Metal Halide lights Guide for you. Technologies of grow lights are changing, and so are the cannabis growing techniques. With that, in case you have to keep yourself in a secured zone, by then unmistakably you’ve to contribute on new experts.

That is the reason; today we’re talking about Ceramic Metal Halide grow light: The new sensation in grow light industry. It pass on such countless grow lights headways for their capability, feasibility, high durability, and best PAR run.

Taking everything in account, okay say you are captivated about CMH structure? Okay prefer to get some answers concerning it? For you we made this best buying helper on CMH which will help you with seeing continuously about it!

In the wake of examining this entire article you’ll perceive what you should think about CMH structure.

EYE HORTILUX CMH 315 Grow Light System

The new Eye Hortilux CMH 315 Grow Light System takes the next step for grow light systems. The short, compact reflector design maximizes light with 8% more light hitting the canopy and 30% more uniform light than the competition.

Hortilux 315w CMH Optimal Setup Recommendation:

Coverage Area 3 ft. x 3 ft..

Height Above Canopy 3 ft..

Distance between fixtures** 3 ft.

The EYE HORTILUX CMH 315 Grow Light System will only accept CMH lamps with a PZGX18 (bi-pin) base. This system will not accept Mogul Base lamps or CMH lamps that are not rated for open fixture use. Carefully install the lamp into the socket by inserting pins into matching shaped holes in socket and turning lamp to right (clockwise). When lamp is properly installed, the base will stop turning.

*Optimal setup and performance measurements based on CMH 315 Watt System with an EYE HORTILUX 315 CMH lamp. Actual performance may vary. **The distance between fixtures should be measured from the center of the lamp.

The EYE HORTILUX CMH 315 grow lamp was designed specifically for horticulture. Most ceramic metal halide lamps were designed for use in the retail space, so the UV light was blocked. EYE HORTILUX uses a glass that allows the UV light to pass through, benefiting plant growth.

30% more light uniformity than the competition

The EYE HORTILUX CMH 315 Grow Light System provides a short, compact reflector design that focuses 8% more light on the canopy and 30% more light uniformity than the competition.

Eye Hortilux CMH 315 Grow Light System Advantages

The exclusive EYE HORTILUX CMH spectrum provides 50% more ultra violet (UV) than the competitive lamps available today. This results in better overall plant growth and higher yields.

Benefits

Traditionally, ceramic metal halide lamps were not designed for horticulture applications. They were designed to block UV when lighting products in retail stores. The EYE HORTILUX 315 grow lamp was engineered to allow safe amounts of UV to pass through the glass and better imitate a plant’s exposure to natural sunlight.

Ceramic Metal Halide

Ceramic HID technology

Exclusive EYE HORTILUX spectrum

50% more UV than competition

Made in the USA

Higher YPF than competition

Designed for plant growth

Sun System LEC 315 CMH Grow Light

The Sun System Light Emitting Ceramic Metal Halide line of lights is by far the best option on the market in 2019. Nothing else really comes close. Naturally, that means it’s a bit more expensive than most competing brands, but if you can afford it, it’s worth the extra cost.

It includes everything you need to light your plants, so you can just plug it in and start growing. You get an all-in-one hood reflector, which means it contains the ballast needed to power the lamp. The bulb socket is at the top of the hood, so the bulb hangs vertically. This makes for a more even light spread than a horizontal bulb.

The inside of the hood is 98% reflective German aluminum with 95% reflective textured corners. This ensures optimal output and uniformity, meaning you are losing as little light as possible from the reflection and there are no hot spots that can burn your plants. It gives you a coverage area of 4 by 4 feet.

Along with the hood, the kit also includes a Philips Master 315W bulb. The kit linked to here includes the 3100K bulb, but there is also a kit available with the 4200K bulb instead. The 4200K bulb is better for vegging, so most growers use it if they are getting a light for the whole grow cycle.

Personally, I think the 3100K does fine with vegging and it’s so much better at flowering, that I would just go with that one for everything, unless I was going to use the light for vegging only. Basically, the increase in vegging efficiency of the 4200K spectrum is more than offset by the increase in yield of the warmer 3100K spectrum.

The Philips bulbs have have an initial lumen output of 33,000 and a very high 1.95 PPF (photosynthetic photon flux) per second. In short, these bulbs give you a huge output considering they only consume 315 watts. Their open rated construction reduces radiant heat from the arc tube. As a result, this kit runs much cooler than a comparable HPS or MH light.

Furthermore, the Philips lamps last a long time, with an expected lifespan of 20,000 hours. More importantly, they retain 90% of their lumen output after 8000 hours of use and still retain 85% of their PPF output after 20,000 hours. It should come as no surprise that this bulb is also our recommendation for the best CMH bulb (see below).

The ballast included in the reflector is a 50/60 Hz low frequency, square wave, electronic ballast, with a rated lifespan of 50,000 hours. Square wave is a newer technology that provides a more constant maximum voltage to the lamp, resulting in a more steady light. Also, their lower frequency means no issues with RF interference.

The whole Sun System CMH kit is covered by a 1-year warranty and there is also a 240 V version available. It gets a Grow Light Info rating of 4.8 out of 5.

Feature

REFLECTIVE FIXTURE: Fixture has 98% reflective German aluminum insert and 95% reflective textured corners for excellent output, uniformity and diffusion.

FULL LIGHT SPECTRUM: Highly efficient agriculturally engineered CDM-T 315 Watt LEC brand lamp (lamp included). Greatly improved full color light spectrum out of next generation ceramic lamps. Higher amounts of beneficial UV and far red spectrums increase the lamp's growth power to the plants.

3100K TEMPERATURE COLOR: Very high 1.95 PPF (photosynthetic photon flux) per second light source. 3100° K color temperature, high 92 CRI, 33,000 initial lumens (105Lm/W).

LONG LIFE: 20,000 hr lamp. High 90% lumen maintenance @ 8,000 hr. High 85% PPF maintenance @ 20,000 hr.

HIGHLY EFFICIENT: 50/60 Hz low frequency, square wave, highly efficient Philips electronic ballast rated for 50,000 hr ballast life.

Pros

All-in-one construction — ballast is built into the hood, making this kit much more compact than others

Bulb hangs vertically — more even light spread than horizontal bulb

Huge output — given the 315 watt consumption, the Philips bulb gives you a huge 33,000 lumen output

Long lifespan — the bulb is rated for 20,000 hours and retains 85% of its PPF output in that time

Square wave ballast — no issues with RF interference and a much more steady stream of light

Low heat output — this light does not need to be ventilated

Free ratchet hangers — a free set of ratchet hangers is included

CONSIDERATIONS BEFORE AND AFTER THE PURCHASE OF CMH LIGHTS

Do you understand what is the most basic and trickiest thing about a CHM light? It’s the stabilizer. Its extremely serious to fathom the focal points of CHM stabilizer that is the reason, we recommend you to buy an entire CHM pack.

Regardless, its incredibly enhanced to purchase another in light of the way that CHM doesn’t manage such a substantial number of sort of electronic stabilizer for high repeat issue.

The CHM globule only sponsorships on some extraordinary quality first class stabilizer with chip. That is the reason in case you’re new with CHM advancement, by then you should buy a full unit which is open with a mechanical assembly, globule, reflector and everything in a pack.

It’s definitely not hard to present and use. An ideal CHM unit has stabilizer (with square-wave technology)which will save you from EMI (ELECTROMAGNETIC INTERFERENCE) issues.

THE CMH LIGHT SETUP: HOW TO DO IT

MH grow light is a tricky thing. If you can set it impeccably, by then it’ll give you the higher yield. That is the reason here we’re bestowing a couple of clues to you which will push you to setup your CMH structure.

Before you buy a pack, constantly read the depiction first, consider the consideration region of the light. By and by if it is suiting your grow room, by then you can contribute on it. Here is a perfect case for you!

We should pick Grow Co. 315W CMH structure grow light with a Philips 3100k CMH globule for example. Directly the ideal consideration zone of it is 3 by 3 feet (3×3) and two feet over the grow tent/overhang.

As I side beforehand, constantly endeavor to cover inside the ideal incorporation region. Thusly, don’t go for 4×4 because the outside side can’t get a better than average proportion of light. It’s a perfect strategy to setup your structure.

The amazing thing about CMH grow light is, you can give it a vertical or level position. So now, you have got an opportunity to find a perfect position for your creating an area yet be wary; don’t hurt your CMH grow light.